User`s manual

231
15) Test Emulation Monitor :
A) EMA15-EMA0 ..........................................OK
B) RESERVED
C) ASEST3-ASEST0 .......................................OK
D) ASEBRKACK ...........................................OK
E) CNN .................................................OK
F) RESERVED
G) WINDOW ..............................................OK
H) IF ..................................................OK
I) OTHER ...............................................OK
Shows the check
results for the
emulation monitor
controlling circuits
in the E6000 (normal
completion).
16) Test PERFM G/A :
A) Time Measurement ....................................OK
B) RESERVED
C) Subroutine Count Measurement ........................OK
D) Timeout Function (TIMOT Bit) ........................OK
E) Timeout Function (TIMOP Bit) ........................OK
Shows the check
results for analysis
controlling circuits
in the E6000 (normal
completion).
17) Test Bus Monitor :
A) Register ............................................OK
B) Parallel RAM ........................................OK
C) SPRSEL2 .............................................OK
D) RAM Monitor .........................................OK
Shows the check
results for the bus
monitor controlling
circuits in the E6000
(normal completion).
18) RESERVED
19) Test Go Reset:
A) PC Break0 ...........................................OK
Shows the check
results for the
hardware PC break
controlling circuits
in the E6000 (normal
completion).
20) Test Normal Mode:
A) Double Stack ........................................OK
B) I/O Stack ...........................................OK
Shows the check
results for the stack
controlling circuits
in the E6000 (normal
completion).
Tests run for xH:xM:xxS Total testing time.
Tests passed, emulator functioning correctly Shows that the E6000
is correctly
operating.