User`s manual
HokutoElectronic FLASH1 User’s Manual
-8-
Preparation 2 - Installation of Control Software –
When the setup program finds the same file name in your PC, the setup program will display the caution recommending you to
avoid overwriting. We recommend you to use the file of the install-disk. When using this control software without overwriting,
guarantee is not valid. And also we can’t guarantee any reflections happened to other applications that well worked before this
installation. Refer to the Windows95 / Windows98 manuals for PC operating system. If you have any troubles, feel free to contact
us. Our support desk is support@hokutoelectronics.com
①Set the attached CD into the CD drive, open the “Explorer” to
find the start file “setup.exe”. Double click the icon of the file.
If the message for MDAC files shows, install the
MDAC files first before ②(see the right column)
②The start window appears at first, click the buttons ”Next”.
③In the next window, the installer find the setup file automatically.
Please confirm the install folder, click the buttons ”Next”. If you
change the directory, click the “Browse” button to find the one.
Install windows
appear to show
the progress.
Click the “Next”
button to
continue the
installation until
the completion
window appears.
⑤ At this window
appears when all the
files for FLASH1 control
software are set up
appropriately, click the
button “Close” to end
the installation.
Double Click
How to install MDAC files
The message below is appeared in the case that MDAC
(Microsoft Data Access Components) files were not
installed in the PC. Click ”ok”, and follow the below to
set up ”Mdac_typ.exe” in the attached CD.
step1
Click in double “Mdac_typ.exe” to start installation. To make
an agreement, check the box at the below and click “次へ”.
step2
The window below indicates that MDAC files are all set up.
Confirm the radio button how to reset the PC, click the
“完了”(complete), and continue to the FLASH2 installation
after reset the PC.
Reset PC immediately
Reset PC later
FLASH1
It is necessary to reset the PC to make install effective.
Yes
A
fter the completion window, the window
below appears when the PC requests reset,
select
“
はい
”
to make installation effective.