User`s manual

HokutoElectronic FLASH1 User’s Manual
4
Specifications
MCU available: All the Renesas Electronics flash memory MCU of dual power supply
H8/538FH8/539FH8/3644F(H8/3642RFH8/3643F)
H8/3048FH8/3334YFH8/3337YFH8/3434FH8/3437F
Programming mode: Only in boot mode
Target MCU: FVPP=12V (UserVcc is within 2.55.5V. Vpp terminal is 60 mA.)
Target interface: IL-S-8S-SS2C2-S (JAE, 8P)
File Format: S format files (Motorola file)
PC available: Windows95/98Japanese version - Some types are not available –
In some types of NEC PC-98sereis, Maximum Bit Rate Adjustment does
not work and the instruction halts.
Please do not operate other applications at the same time.
PC interface: RS232C-serial-port (connecting by using straight cable)
Power Supply: Adapter (DC9V is required)
Or 2 alkaline dry batteries of 1.5V type AA (LR6 / 1.5V)
Case size: 89×134×36mm (not including projection.)
Weight: 180g (not including batteries.)
The serial number place.
Seal
FLASH1 The image of the case
LED state
USER VCC
When power is supplied from
target board, this LED lights up.
VPP
When VPP (12V is
supplied, this LED lights up.
POWER
When power is supplied
durign USER VCC is lighting
up, this LED lights up.
Both batteries and AC adapter can be used as a
power supply for FLASH1.
FALSH1
Serial seal on
front box
Serial seal on provided CD.
Back of the case.
Inside of the battery box.
AC adapter
From PC
RS232C
port
DSUB25P
Female
connector
From target
boar
d
MIL standard
Boxed plug
10P