User`s manual

HokutoElectronic FLASH1 User’s Manual
3
FLASH1 Outline
FLASH1 has been designed to program flash memory MCU, made by Renesas Electronics.
This FLASH1 circuit management at writing to
memory is fully automated. Writing to the target
MCU from the user's PC can be carried out without
switch operation smoothly. All of Renesas
Electronics dual power supply flash memory MCU
is available to reprogram on board.
Attached in this kit, the sample software provides
an easy way of confirming the LED movement on
the boards HSB series, of our product. We
recommend smart choice of using HSB as a target.
Contents
Package The product is packed in the white box. (The box size is 212×277×62mm)
Notification papers
Cardboard
Provided CD
Cardboard
FLASH1
Provided cable
Provided adapter
The provided CD includes
RS232C
Straight
cable
MOT
P
FLASH1forWin
Boot mode
Start programming after erasing internal ROM
Target board
Flash MCU
FLASH1
The PDF manual is recorded in
the provided CD.
Installation file for English OS
Double click (When using in English)
Manual (English PDF manual)
Installation file for Japanese OS
Double click (When using in Japanese)
Demonstration Categorized by HSB
Support file
Manual (Japanese PDF manual)
About Demonstration Program
A
ttached CD also includes the sample program for HSB series MCU board by HokutoElectronicd. In
“sample” folder of the CD, there are 4 programs for each MCU type ; freqmeta.mot, stopwat.mot,
voltmeta.mot, watch.mot. Please note that all these programs are in Japanese. All comments will be
displayed correctly with Japanese OS>