Technical data

FIRE Emulator for H8S and H8/300H 25 Special Settings and Restrictions H8S/222x/

Normally, the timers continue running if the emulation is stopped. If the option is now switched on, the

corresponding timer will stop after entering the break mode and will start running again before the emulation

is started. This is done by manipulating the timer start register by the emulators background monitor

program. Since there have to be done some important actions in the monitor before the timer control, the

starting and stopping can’t be synchronous to the emulators “go” and “break”.

SYStem.Option T8 Control of 8-bit timer unit

This option controls the timers of the CPUs 8-bit timers for each channel independently (see

SYStem.Option TPU)

Format: SYStem.Option T8_<channel> [ON | OFF]

<channel>: 0 | 1 | 2 | 3