Hardware manual

Rev. 3.0, 09/98, page 142 of 361
Bit 1Output Level A (OLVLA): This bit selects the logic level to be output at the FTOA pin
when the FRC and OCRA values match.
Bit 1
OLVLA Description
0 A “0” logic level (Low) is output for compare-match A. (Initial value)
1 A “1” logic level (High) is output for compare-match A.
Bit 0Output Level B (OLVLB): This bit selects the logic level to be output at the FTOB pin
when the FRC and OCRB values match.
Bit 0
OLVLB Description
0 A “0” logic level (Low) is output for compare-match B. (Initial value)
1 A “1” logic level (High) is output for compare-match B.