Technical information

22
17) Testing Bus Monitor :
A) Register ........................................OK
B) Parallel RAM ....................................OK
C) SPRSEL2 .........................................OK
D) RAM Monitor .....................................OK
Shows the check
results for the bus
monitor controlling
circuits in the E6000
(normal completion).
18) Testing Parallel Access :
A) Internal ROM Parallel Read Access(WORD) ........OK
B) Internal ROM Parallel Write Access(WORD) .......OK
C) Internal ROM Parallel Write Access(High Byte) ..OK
D) Internal ROM Parallel Write Access(Low Byte) ...OK
E) Option RAM Parallel Read Access(WORD) ..........SKIP
F) Option RAM Parallel Write Access(WORD) .........SKIP
G) Option RAM Parallel Write Access(High Byte) ....SKIP
H) Option RAM Parallel Write Access(Low Byte) .....SKIP
Shows the check
results for the parallel
access controlling
circuits in the E6000
(normal completion).
Tests run for xH:xM:xS
Shows the check time.
Tests passed, emulator functioning correctly
Shows that the E6000
is correctly operating.
When –S is added to the command line, step 1 will be executed again after step 18.