Technical information

21
12) Testing Hardware Break :
A) Break Point Initialized .........................OK
B) Event Detectors CES channel 1-12 ................OK
C) Test Sequencing 1 ...............................OK
D) Check Range Break ...............................OK
E) Range Break Test for Data .......................OK
F) Check Compare Either ............................OK
Shows the check
results for the
hardware break
control circuits in the
E6000 (normal
completion).
13) Testing Emulation RAM Trace :
A) Free Trace ......................................OK
B) Range Trace .....................................OK
C) Point to Point Trace ............................OK
D) Start and Stop Event Trace ......................OK
E) Trace memory Overflow ...........................OK
F) Time STAMP Trace (35MHz) ........................OK
G) Time STAMP Trace (25MHz) ........................OK
H) Time STAMP Trace (12MHz) ........................OK
Shows the check
results for the trace
controlling circuits in
the E6000 (normal
completion).
14) Testing Runtime Counter :
Testing Internal Clock = 16.00MHz .................OK
Testing Internal Clock = 8.00MHz .................OK
Testing CLK Generate = 34.00MHz .................OK
Testing CLK Generate = 16.18MHz .................OK
Testing CLK Generate = 11.46MHz .................OK
Testing CLK Generate = 13.56MHz .................OK
Testing CLK Generate = 22.47MHz .................OK
Shows the check
results for the run-
time counter in the
E6000 (normal
completion).
15) Testing Emulation Monitor :
A) ACST3-ACST0 .....................................OK
B) EMA23-EMA0 ......................................OK
C) ASEST3-ASEST0 ...................................OK
D) ASEBRKACK (MONIT0E) .............................OK
E) CNN .............................................OK
F) NOCLK ...........................................OK
Shows the check
results for the
emulation monitor
controlling circuits in
the E6000 (normal
completion).
16) Testing PERFM G/A :
A) Time Measurement (Unit 20ns) ....................OK
B) Time Measurement (Unit Target) ..................OK
C) Subroutine Count Measurement ....................OK
D) Timeout Function (TIMOT Bit) ....................OK
E) Timeout Function (TIMOP Bit) ....................OK
Shows the check
results for the
performance analysis
controlling circuits in
the E6000 (normal
completion).