Technical information

12
3.5 Emulating the H8/3048-ONE
When the E6000 is used to emulate the H8/3048-ONE, the E6000 will use the specifications of the
H8/3048F for the following registers. This is because the E6000 does not have the functions.
For details, refer to section 1.4.3, Differences in H8/3048F and H8/3048F-ONE in the H8/3048
Series, H8/3048F-ONE Hardware Manual.
•
A/D Control Register (ADCR)
•
WDT Reset Control/Status Register (RSTCSR)
•
SYS2-0 in the System Control Register (SYSCR)