Technical information
Table Of Contents
- Preface
- Section 1Configuration
- Section 2Connection Procedures
- Section 3 Installing the MCU to the User System
- Section 4 Verifying Operation
- Section 5 Notice
2.3 Recommended Dimensions for User System Mount Pad
Figure 5 shows the recommended dimensions for the mount pad (footprint) for the user system with
an IC socket for an FP-144H package (IC149-144-045-B51: manufactured by YAMAICHI
ELECTRONICS CO., Ltd.). Note that the dimensions in figure 5 are somewhat different from
those of the actual chip's mount pad.
Figure 5 Recommended Dimensions for Mount Pad
9