Instruction manual

Site Schematic Check List
Access Control Design Guide 61
 The door/elevator it is to control
 Cable type and routing path to the controller
 The port to be used for an RS485 reader (if applicable)
 Two readers at one door: the location of the paired reader (if applicable), and the port number to use
at the door controller
Door Furniture
For each access-controlled door, mark the following:
 Position of any required exit-request button
 Whether a bypass circuit is needed
 Details of any special noise-suppression circuitry
 Details of any additional power supplies required for door releases
 Cable type and routing path to controller
 Cable supervision level for exit request and door monitor circuits
Additional Power Supplies (if necessary)
For any additional power supply, mark the following:
 The purpose of the power supply
 The output current and voltage specifications
 The required location
 The cable type and routing path
 The main power source
 The grounding point
 The backup power source (normally a 12V 7AH battery)
SMS Software and PC Requirements
Specify the following:
 The SMS software Edition to use (e.g. Professional)
 The type and location of each SMS client
 The sentinels to fit to the server(s)
 Refer to the Software Installation Manual for PC requirements
 Refer to the Digital Video Design Guide to plan digital video systems (if used)