Instruction manual

© G4S Technology 2009
All rights reserved. No part of this publication may be reproduced in any form without the written permission of
G4S Technology Limited.
G4S Technology Limited cannot be held liable for technical and editorial omissions or errors made herein; nor
for incidental or consequential damages resulting from the furnishing, performance or use of this material.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference. In which case, the
user will be required to correct the interference at his own expense.
Access Control Design Guide
MAN-M2150/ENG
(9600-0420)
Issue 1.4 – 1
st
November 2010
All trademarks acknowledged.
ENVS and Symmetry are trademarks of G4S Technology Limited.
MIFARE is a registered trademark of NXP Semiconductors.
HID is a registered trademark of HID Corporation.
Texas Instruments is a trademark of Texas Instruments Incorporated.
iCLASS is a trademark of HID Corporation.