User`s manual

Applilet EZ for HCD Controller
APPENDIX E RESERVED AREA USED IN ON-CHIP DEBUGGING
R20UT0435EJ1200 Rev. 12.00 55
Jul 31, 2014
APPENDIX E RESERVED AREAS USED IN ON-CHIP DEBUGGING
The reserved areas shaded in gray in Figures F-1 and F-2 are used during on-chip debugging.
Figure F-1. Reserved Areas Used in On-chip Debugging (
 PD78F8024)
Internal ROM space Internal RAM space
0x0000H
0x0002H
0x0003H
0x0014H
0x0015H
0x007EH
0x007FH
0x03FFH
0x0084H
0x0085H
0x0080H
Debug monitor area
(381 bytes)
Option byte area (5 bytes)
Software break area (2 bytes)
Debug monitor area (2 bytes)
Stack area for debugging
(16 bytes)
UART6 reception interrupt vector
(2 bytes)
Figure F-2. Reserved Areas Used in On-chip Debugging (78K0/Ix2)
Internal ROM space Internal RAM space
0x0000H
0x0002H
0x0003H
0x028FH
0x018FH
0x018EH
0x008FH
0x008EH
0x007FH
0x007EH
0x0085H
0x0084H
Debug monitor area (2 bytes)
Software break area (2 bytes)
Security ID setting area
(10 bytes)
Option byte area (1 byte)
Debug monitor area
(256 bytes (MIN.))
Pseudo PRM area
(128 bytes (MAX.))
Stack area for debugging
(9 bytes (MAX.))