User`s manual

Applilet EZ for HCD Controller CHAPTER 5 WINDOW REFERENCE
R20UT0435EJ1200 Rev. 12.00 39
Jul 31, 2014
[DMX512 Property] dialog box
This dialog box can be opened by clicking [DMX
512...] in the [Project] menu.
Set channel numbers of DMX512 in this dialog box.
Figure 5-6. [DMX512 Property] dialog box
The following parts of this window are described below.
 Description of function-related areas
 Function buttons
Description of function-related areas
(1) Channel X
Enter a number from 1 to 512 in order to assign each channel to a slot (channel) of the DMX512 protocol.
If an existing configuration file is open, the value in that file is displayed.
(2) Enable DMX Status Slot.
Input the slot (channel) to which to assign the DMX status as a value from 1 to 512.
Do not select this checkbox if not using the DMX status slot.
The status is valid only for EV-K0-HCD, EV-K0-HCD2, EZ-0009, or EZ-0006.
The following operations are performed according to the data of the slot (channel) to which the status is assigned.
0x80 (128): Sets the constant-current driver IC enable signal to low level (the shutdown status).
0x00 (0): Sets the constant-current driver IC enable signal to high level (the enabled status).
No operation is performed for other values.
Remark The channel 4 and DMX status slot cannot be used for EZ-0005, EZ-0011.
Function buttons
Button Description
Click this button to save the current settings and close the open dialog box.
Click this button to close the open dialog box without saving the current settings.
(1)
(2)