User`s manual

Applilet EZ for HCD Controller CHAPTER 5 WINDOW REFERENCE
R20UT0435EJ1200 Rev. 12.00 36
Jul 31, 2014
[CSI Property] dialog box
This dialog box can be opened by clicking [C
SI...] in the [Project] menu.
Set SS pin of CSI10 in this dialog box.
This setting operates only in slave mode.
Figure 5-4. [CSI Property] dialog box
<For the EV-K0-HCD, EV-K0-HCD2, and EZ-0009> < For the EZ-0005>
The following parts of this window are described below.
 Description of function-related areas
 Function buttons
Description of function-related areas
(1) S
laveSelect Enable
Select this checkbox when using the SS pin function.
Items (2) and (3) cannot be set when this checkbox is not selected.
(2) Pin Assign
For the EV-K0-HCD, EV-K0-HCD2, and EZ-0009, any of INTP0, INTP2, and INTP3 can be selected.
For the EZ-0005, this setting is fixed to SSI11.
(3) Active Level
For the EV-K0-HCD, EV-K0-HCD2, and EZ-0009, either LOW or HIGH can be selected.
For the EZ-0005, this setting is fixed to LOW.
Function buttons
Button Description
Click this button to save the current settings and close the open dialog box.
Click this button to close the open dialog box without saving the current settings.
(1)
(2)
(3)
(1)
(2)
(3)