User`s manual

Applilet EZ for HCD Controller CHAPTER 5 WINDOW REFERENCE
R20UT0435EJ1200 Rev. 12.00 34
Jul 31, 2014
[UARTx Settings] dialog box
This dialog box can be opened by clicking [UARTx
...] in the [Project] menu.
Set UARTx in this dialog box.
The setting items are identical in both dialog boxes. The [UARTx Settings] dialog box is used below as an example.
Figure 5-2. [UARTx Settings] dialog box
The following parts of this window are described below.
 Description of function-related areas
 Function buttons
Description of function-related areas
(1) S
peed:
This can be selected from 9,600, 19,200, and 115,200 bps.
(2) D
ata bits:
This is fixed to 8 bits and cannot be changed.
(3) P
arity:
This can be selected from None, Odd, and Even.
(4) St
art bit:, Stop bit:
These are fixed to LSB and 1 bit respectively, and cannot be changed.
Function buttons
Button Description
Click this button to save the current settings and close the open dialog box.
Click this button to close the open dialog box without saving the current settings.
(1)
(2)
(3)
(4)