User`s manual

Applilet EZ for HCD Controller CHAPTER 5 WINDOW REFERENCE
R20UT0435EJ1200 Rev. 12.00 32
Jul 31, 2014
Menu bar
(1) [F
ile] menu
[Create New] This option is used to create a new setting.
Clicking the
button selects the same function.
[Open...] This option is used to open an existing setting file.
Use the dialog box that opens for this option to select the existing setting file (*.xml).
Clicking the
button selects the same function.
[Save] This option is used to save the current settings.
Clicking the
button selects the same function.
[Save as...] This option is used to save the current settings with a newly named.
[Exit] This option is used to close Applilet EZ for HCD Controller.
(2) [P
roject] menu
[Board...] This option is used to open the [Board Property] dialog box.
[UART6...] This option is used to open the [UART6 Settings] dialog box.
[UART0...] This option is used to open the [UART0 Settings] dialog box.
[IIC..] This option is used to open the [IIC Property] dialog box.
[CSI...] This option is used to open the [CSI Property] dialog box.
[DALI...] This option is used to open the [DALI Property] dialog box.
[DMX512...] This option is used to open the [DMX512 Property] dialog box.
[Motion sensor.] This option is used to open the [Motion sensor mode] dialog box.
[Light sensor.] This option is used to open the [LightSensor mode] dialog box.
(3) [B
uild] menu
[Generate and Build] Executes automatic generation of object codes (*.hex).
Clicking the
button selects the same function.
[FLASH Programming] Writes an already generated object codes (*.hex).
Clicking the
button selects the same function.
[All procedure] Executes automatic generation and writing of object codes (*.hex).
For the procedures from generation to writing, refer to 4.4 Generation, Writing, and
Evaluation.
Clicking the
button selects the same function.
(4) [S
etting] menu
[Compiler] Select the compiler to be used.
[FLASH Program...] This option is used to open the [FLASH Programming Settings] dialog box.
[Folders...] This option is used to open the [Folder Settings] dialog box.