User`s manual

Applilet EZ for HCD Controller CHAPTER 5 WINDOW REFERENCE
R20UT0435EJ1200 Rev. 12.00 31
Jul 31, 2014
Main window
This window is opened automatically when Applilet EZ for HCD Controller is started.
Setting items (Setting up the evaluation board, mode setting (refer to 4.2 and 4.3), etc.) are sequentially selected in this
window to automatically generate object codes (*.hex) that can be directly written to the flash memory of a microcontroller.
Figure 5-1. Main Window
The following parts of this window are described below.
 Menu bar
 Tool bar
Note For the mode setting area, refer to 4.3 Mode Setting.
Menu bar
Tool bar
Mode setting area
Note
Setting content display area