User`s manual
Applilet EZ for HCD Controller CHAPTER 5 WINDOW REFERENCE
R20UT0435EJ1200 Rev. 12.00 29
Jul 31, 2014
CHAPTER 5 WINDOW REFERENCE
5.1 Overview of Windows and Dialog Boxes
The following windows and dialog boxes are provided with Applilet EZ for HCD Controller.
Table 5-1. List of Windows and Dialog Boxes in Applilet EZ for HCD Controller
Window/Dialog Box Name Description
Main window This window is opened automatically when Applilet EZ for HCD Controller
is started. This window is used to select and set all functions to be
included in the automatically generated object codes.
[UART6 Settings] dialog box This dialog box is used to set UART6.
[UART1 Settings] dialog box This dialog box is used to set UART1.
[UART0 Settings] dialog box This dialog box is used to set UART0.
[IIC Property] dialog box This dialog box is used to set IIC.
This setting operates only in slave mode.
[CSI Property] dialog box This dialog box is used to set SS pin of CSI10.
This setting operates only in slave mode.
[DALI Property] dialog box This dialog box is used to set DALI.
[DMX512 Property] dialog box This dialog box is used to set DMX512.
[Board Property] dialog box This dialog box is used to set the evaluation board.
For details, refer to 4.2.
[Compiler] Select the compiler to be used.
For details, refer to 3.1.1.
[FLASH Programming Settings]
dialog box
This dialog box is used to set flash programming.
For details, refer to 3.1.1.
[Folder Settings] dialog box This dialog box is used to set a folder into which the generated file is to be
saved.
For details, refer to 3.1.1.