User`s manual

Applilet EZ for HCD Controller CHAPTER
4 APPLILET EZ FOR HCD CONTROLLER OPERATION
R20UT0435EJ1200 Rev. 12.00 24
Jul 31, 2014
4.3.8 IR Remote controller control mode
In this mode, lights are dimmed by using the on-board function for receiving remote control signals. Remote control
signals in the Renesas format can be received. This mode can be selected only for EZ-0012.
In this mode, the custom code and data code can be specified as a four-digit and a two-digit hexadecimal respectively.
The dimming level is changed as OFF --> 100% --> 50% --> 10% --> OFF every time the remote control code is received.
When an evaluation is performed using the infrared remote control function of the lighting communication master
evaluation board (EZ-0008), which is optionally available, set the following values based on the channel settings on the
master evaluation board.
 CH01: Custom code = 0x0000. Data code = 0x5AA5
 CH02: Custom code = 0x0000. Data code = 0xDA25