User`s manual
Applilet EZ for HCD Controller CHAPTER
4 APPLILET EZ FOR HCD CONTROLLER OPERATION
R20UT0435EJ1200 Rev. 12.00 23
Jul 31, 2014
4.3.7 Switch mode
In this mode, light is controlled depending on the switches connected to the board. Only EZ-0011 can be selected. Each
switch number corresponds to an LED channel in EZ-0011. Switch mode has 2 modes.
Mode1: Fade mode
You can press and hold the switch to gradually raise or lower (fade) the dimming level.
Press and release the switch to turn the light ON or OFF.
Press and hold to raise/lower the dimming level to the degree to which it is pressed.
Mode 2 level dimming mode
Go to 1520305010050302015 [%] by pressing down the switch to change the dimming level in
steps.