User`s manual

Applilet EZ for HCD Controller CHAPTER
4 APPLILET EZ FOR HCD CONTROLLER OPERATION
R20UT0435EJ1200 Rev. 12.00 22
Jul 31, 2014
4.3.6 DALI mode
In this mode, the LEDs are dimmed by using the DALI protocol.
DALI (Digital Addressable Lighting Interface) is an international open standard lighting control communication protocol,
mainly used for light control of multiple fluorescent lamps or LED lights.
For the communication command of DALI, refer to APPENDIX D DALI MODE COMMUNICATION DATA.
<1> Select the [DALI] button in Dimmer Program.
<2> Open the [DALI Property] dialog box by selecting [Project] and then [DALI…] in the menu, and then specify the
channel number. For details about this setting, see the [DALI Property] dialog box described in CHAPTER 5
WINDOW REFERENCE.
<3> Click
icon or select Menu  [File]  [Save] to save the project.
Caution: When using the GNU GCC compiler in RL78/I1A AC/DC full digital 3-ch LED control unit, values
specified for the Factory Burn in parameter in the Memory Bank section defined by IEC62386-102 and
values specified for all parameters in the Declaration of variables section except the ROM parameter
are not retained when the power to the microcontroller is turned off or the microcontroller is reset.