User`s manual

How to Use This Manual
Target Readers This manual is intended for user engineers who wish to understand the functions
of the
 PD78F8024, 78F8025, 78F0754, or 78F0756 in order to design and
develop its application systems and programs.
Purpose This manual is intended to give users an understanding how to use Applilet EZ for
HCD Controller and of the functions described in the Organization below.
Organization This manual is broadly divided into the following parts.
 Overview
 Installation
 Startup and termination
 Applilet EZ for HCD Controller operation
 Windows reference
How to Use This Manual It is assumed that the readers of this manual have general knowledge of electrical
engineering, logic circuits, and microcontrollers.
 To understand the overall functions of Applilet EZ for HCD Controller
 Read this manual in the order of the CONTENTS. The mark <R> shows
major revised points. The revised points can be easily searched by copying
an “<R>” in the PDF file and specifying it in the “Find what:” field.
 To learn the details of the hardware functions of the
 PD78F8024
 Refer to
 PD78F8024, 78F8025 User’s Manual (U18976E).
 To learn the details of the hardware functions of the78K0/Ix2
 Refer to 78K0/Ix2 User’s Manual (R01UH0010E).
 To learn the details of the hardware functions of theRL78/I1A
 Refer to RL78/I1A User’s Manual (R01UH0169E).
Conventions Data significance: Higher digits on the left and lower digits on the right
Active low representation:  (overscore over pin or signal name)
Note: Footnote for item marked with Note in the text
Caution: Information requiring particular attention
Remark: Supplementary information
Numerical representation: Binary ...  or B
Decimal ... 
Hexadecimal ... H