User`s manual

Applilet EZ for HCD Controller CHAPTER
4 APPLILET EZ FOR HCD CONTROLLER OPERATION
R20UT0435EJ1200 Rev. 12.00 21
Jul 31, 2014
4.3.5 DMX512 mode
In this mode, the LEDs are dimmed by using the DMX512 protocol.
For the communication command of DMX512, refer to APPENDIX C DMX512 MODE COMMUNICATION DATA.
<1> Select the [DMX512] button in Dimmer Program
Note
.
<2> Push the [Setting] button and then [DMX512…] in the menu, and then specify the channel number. For details
about this setting, see the [DMX512 Property] dialog box described in CHAPTER 5 WINDOW REFERENCE.
<3> Click
icon or select Menu  [File]  [Save] to save the project.
Note For the EV-K0-HCD, EV-K0-HCD2, and EZ-0009, DMX512 cannot be selected with the following settings.
 When the clock source is set to [Internal osc.] in the [Board Property] dialog box
 When the CPU clock is set to 4 MHz by selecting UART0 or UART6 via [by]