User`s manual

Applilet EZ for HCD Controller CHAPTER 2 INSTALLATION
R20UT0435EJ1200 Rev. 12.00 4
Jul 31, 2014
CHAPTER 2 INSTALLATION
2.1 Installing Application
The following applications must be installed to use Applilet EZ for HCD Controller.
 Applilit EZ for HCD Controller
 Compiler, assembler, or integrated development environment and device file
Note 1
Notes 1. Install one of the following as the compiler, assembler, integrated development environment and device file.
Install the device file according to the chip mounted on the evaluation board.
<Renesas Electronics>
Compiler: CC78K0 (Ver. 3.80 or Ver. 4.00)
Assembler: RA78K0 (Ver. 3.70 or Ver. 4.01)
Device file: DF788025 or DF780756 (only when developing a system in PM+)
Note 2
Or
Integrated development environment: CubeSuite CA78K0/Ix2LED
<IAR Systems>
Integrated development environment: IAR Embedded Workbench
Compiler: IAR C/C++ Compiler for Renesas 78K0
IAR C/C++ Compiler for Renesas RL78
Assembler: IAR Assembler for Renesas 78K0
IAR Assembler for Renesas RL78
Device file: DF-78K0-788025-EE_xxxxx
DF-78K0-Ix2-EE_xxxxx
DF-RL78I1A-EE_xxxxx
<KPIT (GCC)>
Tool package: GNURL78
2. The device file for PM+ is necessary to re-edit or re-compile a source file that was generated by Applilet EZ
for HCD Controller in PM+. The device file is not required when using the source file only in Applilet EZ for
HCD Controller.
Remark For details about how to obtain compilers, assemblers, integrated development environments, and device
files, contact your local Renesas Electronics sales representative.