User`s manual
Applilet EZ for HCD Controller CHAPTER 1 OVERVIEW
R20UT0435EJ1200 Rev. 12.00 2
Jul 31, 2014
1.2 Host Machine, Software, and Hardware Configurations
The host machine, software, and hardware configurations for using Applilet EZ for HCD Controller are shown below.
(1) Host machine
OS: Windows XP
TM
(32-bit mode), Windows Vista
TM
(32-bit mode), Windows 7 (32-/64-bit mode)
CPU: Must satisfy the recommended requirements for each OS
Memory: Must satisfy the recommended requirements for each OS
USB: USB 1.1 interface or later
(2) Software
Applilet EZ for HCD Controller (this software)
Browser: Internet Explorer
TM
6.0 or later
Software that can edit CSV files, such as Microsoft Excel
TM
Assembler/compiler/integrated development environment/device file
Note 1
<Renesas Electronics
Note 2
>
Compiler
Note 6
: CC78K0 (Ver. 3.80 or Ver. 4.00)
Assembler
Note 6
: RA78K0 (Ver. 3.70 or Ver. 4.01)
Note 3
Device file: DF788025 or DF780756 (only when developing a system in PM+)
Note 4
Or
Integrated Development Environment: CubeSuite+ CA78K0
,
CA78K0R
<IAR Systems>
Integrated development environment: IAR Embedded Workbench
Compiler
Note 6
: IAR C/C++ Compiler for Renesas 78K0
IAR C/C++ Compiler for Renesas RL78
Assembler
Note 6
: IAR Assembler for Renesas 78K0
IAR Assembler for Renesas RL78
Device file
Note 6
: DF-78K0-788025-EE_xxxxx
Note 5
DF-78K0-Ix2-EE_xxxxx
Note 5
DF-RL78I1A-EE_xxxxx
Note 5
<KPIT (GCC)>
Tool package: GNURL78
Note 7
Parameter file
PRM78F8025·········Parameter file for the
PD78F8024, 78F8025 including information of flash memory
programming
PRM78F0756·········Parameter file for the
PD78F0754, 78F0756 including information of flash memory
programming
Renesas Flash Programmer or WriteEZ5
········Software for flash memory programming
Board driver ·············Driver used to make the host PC recognize the evaluation board (EV-K0-HCD, etc.)
(3) Hardware
Evaluation board
EV-K0-HCD ············· This is an evaluation board for high-brightness LEDs that uses the
PD78F8024.
Red, green, blue, and white LEDs are mounted on the board. The LEDs can be controlled in
8-bit resolution by using the constant-current driver IC mounted on the
PD78F8024.
EV-K0-HCD2 ··········· This evaluation board is the same as the EV-K0-HCD—a board for evaluating high-
brightness LEDs—except that it uses the
PD78F8025 as the microcontroller unit.
(Shine it)