User`s manual

EZ-0011 CHAPTER 3 USING EZ-0011
R20UT0702EJ0100 Rev. 1.00 Page 16 of 30
Jun 20, 2011
3.1.4 Installing software auto generation tool Applilet EZ for HCD
The software auto generation tool Applilet EZ for HCD is provided for easy evaluation of the functions of this product.
Files generated by his application can also be used as sample programs. Install it to the PC in the following steps.
Caution To use this software, the assembler (RA78K0) and complier (CC78K0) are required.
<1> Download the Applilet EZ for HCD from the download page for the EZ-0011.
<2> Decompress the compressed file AppliletEZforHCD_VxxxJ.zip, and execute the installer file
AppliletEZforHCD_VxxxJ.msi. (("xxx" indicates the version.)
<3> Follow the instructions of the installer. Read the license agreement, and continue the installation if it is OK.
3.1.5 Installing DALI/DMX512 master control GUI
To perform dimming control via DALI communication/DMX512 communication, our “lighting communication master
evaluation board (EZ-0008)” and GUI can be used for easy evaluation.
For the lighting communication master evaluation board (EZ-0008), refer to Lighting Communication Master Evaluation
Board (EZ-0008) Quick Start Guide (Document No.: ZUD-CE-09-0018).
For details and installation method of the DALI master controller GUI, refer to DALI Master Controller GUI User's Manual
(Document No.: U19607). For details and installation method of the DMX512 master controller GUI, refer to DMX512
Master Controller GUI User's Manual (U19596E).