User`s manual

M30850T2-EPB User’s Manual Precautions for Safety
R20UT0208EJ0300 Rev.3.00 Page 9 of 100
Sep 16, 2010
CAUTION
Cautions to Be Taken for Turning On the Power:
• Turn ON the power of the emulator and user system as simultaneously as possible. Turn OFF the power of the
emulator and user system as simultaneously as possible.
• Do not leave either the emulator or user system powered on, because of leakage current the internal circuits may
be damaged.
• When turning ON the power again after shutting OFF the power, wait about 10 seconds.
Cautions to Be Taken for Handling This Product:
• Use caution when handling the main unit. Be careful not to apply a mechanical shock.
• Do not touch the connector pins of the emulator main unit and the target MCU connector pins. Static electricity
may damage the internal circuits.
• Do not pull this product by the flexible cable for connecting to the emulator main unit and emulation probe. The
cable may cause a break.
• Do not flex the flexible cable for connecting to the emulator main unit and emulation probe excessively. The
cable may cause a break.
• Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO (meter-size) type
screws. When replacing screws, use same type screws as equipped before.
Caution to Be Taken for System Malfunctions:
• If the emulator malfunctions because of interference like external noise, do the following to remedy the trouble.
(1) Press the RESET switch on the emulator upper panel.
(2) If normal operation is not restored after step (1), shut OFF power to the emulator once and then reactivate it.
Cautions to Be Taken for Disposal:
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national
legislation.
European Union regulatory notices
Renesas development tools and products are directly covered by the European Union's Waste Electrical and
Electronic Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories,
must not be disposed of as household waste but through your locally recognized recycling or disposal schemes.
As part of our commitment to environmental responsibility Renesas also offers to take back the equipment and
has implemented a Tools Product Recycling Program for customers in Europe. This allows you to return
equipment to Renesas for disposal through our approved Producer Compliance Scheme. To register for the
program, click here “
http://www.renesas.com/weee”.