User`s manual

M30850T2-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
R20UT0208EJ0300 Rev.3.00 Page 54 of 100
Sep 16, 2010
3.2 Starting Up the Emulator Debugger (EMEM Dialog Box)
(1) Status tab
1. Specifying the processor mode
IMPORTANT
Notes on Selecting a Processor Mode:
• When setting single-chip mode or memory expansion mode, the level of pin CNVSS of the MCU status should
be "L". The MCU status shows the pin level of the user system.
• When setting microprocessor mode, the level of pin CNVSS of the MCU status should be "H".
• When setting memory expansion mode or microprocessor mode, pins RDY# and HOLD# of the user system
should be "H".
• When the user system is not connected, all modes are available.
Cancel Help
Specifying the processor mode
Select the appropriate processor mode that suits your
system.