User`s manual

M30850T2-EPB User’s Manual 2. Setup
R20UT0208EJ0300 Rev.3.00 Page 30 of 100
Sep 16, 2010
2.9 Connecting the User System
There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
144-pin 0.5mm pitch
0.65mm pitch
0.5mm pitch
M30800T-PTC
M3T-100LCC-DMS
M3T-FLX100-T M3T-FLX100-R
*1
LCC socket
100-pin LCC
M3T-DIRECT100S
M3T-DUMMY100S
M3T-F160-100NSD
100-pin LQFP
M3T-FLX-144NSD
144-pin LQFP
100-pin
M3T-F160-100NRB
100-pin QFP
(not included)
Emulation probe
(not included)
(not included)(not included)
(not included) (not included)
100-pin QFP
(not included)
100-pin QFP
(not included)
(not included)
(not included)
●: No1. pin
*1: These items are available in one package *2: Discontinued products
*2
*2
Figure 2.7 Connection of the M30850T2-EPB and user system
CAUTION
Note on Connecting the User System:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech
Corporation.