Emulation Probe User's Manual
Table Of Contents
- Preface
- Contents
- 1. Precautions for Safety
- 2. Preparation
- 3. Setting Up
- 3.1 Selecting Clock Supply
- 3.2 Using an Internal Oscillator Circuit Board
- 3.3 Using the Oscillator Circuit on the Target System
- 3.4 Using the Internal Oscillator Circuit
- 3.5 Setting Switches
- 3.6 A-D Conversion Bypass Capacitor
- 3.7 Connecting the PC7501
- 3.8 Connecting the Target System
- (1) Connecting to a 100-pin LCC Socket
- (2) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)
- (3) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)
- (4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)
- (5) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 1)
- (6) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 2)
- (7) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 3)
- (8) Connecting to a 144-pin 0.5-mm-pitch Foot Pattern
- 4. Usage
- 5. Specifications
- 6. Troubleshooting
- 7. Maintenance and Guarantee
( 5 / 76 )
4.2 Downloading Firmware ......................................................................................50
(1) When It is Necessary to Download Firmware .........................................50
(2) Downloading Firmware in Maintenance Mode .......................................50
4.3 Starting Up the Emulator Debugger (Setting the EMEM Dialog Box) ..............51
(1) Setting the Debug Monitor Bank Address ...............................................52
(2) Selecting a Processor Mode .....................................................................52
(3) Setting Emulation Memory ......................................................................53
(4) Emulation Memory Allocation as Expansion Area .................................53
(5) Referring MCU STATUS ........................................................................55
4.4 Self-check............................................................................................................55
(1) Self-check Procedure ...............................................................................55
(2) If an Error is Detected in the Self-check ..................................................55
Chapter 5. Specifications ......................................................................................................57
5.1 Specifications ......................................................................................................58
5.2 Connection Diagrams ..........................................................................................59
5.3 External Dimensions ...........................................................................................61
(1) External Dimensions of the Emulation Probe ..........................................61
(2) External Dimensions of Converter Board M30800T-PTC ......................62
(3) External Dimensions of Converter Board M3T-F160-100NSD ..............63
(4) External Dimensions of Converter Board M3T-FLX-144NSD ...............63
Chapter 6. Troubleshooting ..................................................................................................65
6.1 Flowchart to Remedy the Troubles .....................................................................66
6.2 When the Emulator Debugger Does Not Start Up Properly ...............................67
(1) When the LED Display of the PC7501 is Abnormal ...............................67
(2)
EMEM Dialog Box is Not Displayed at Debugger Startup (Target Connected) .................
68
(3)
EMEM Dialog Box is Not Displayed at Debugger Startup (Target Not Connected) ..........
69
(4) Errors Occur at Debugger Startup (Target Connected)............................69
6.3 How to Request for Support................................................................................70
Chapter 7. Maintenance and Guarantee................................................................................71
7.1 Maintenance ........................................................................................................72
7.2 Guarantee ............................................................................................................72
7.3 Repair Provisions ................................................................................................72
7.4 How to Request for Repair..................................................................................73