To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.
Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office.
M16C R8C PC7501 Emulator Debugger V.1.03.00 Release Notes This document describes the notes of this debugger, and please read before you start to use this debugger. And also, please refer to the “High-performance Embedded Workshop Release Notes” about the notes of High-performance Embedded Workshop IDE. Contents 1 Notes .......................................................................................................................................................... 2 1.1 Line Assembly ..............
1 Notes 1.1 Line Assembly Regardless of the Radix setting, the default for line assembly input is decimal. Specify H as the radix for a hexadecimal input. 1.2 Event Setting 1. TAB order in Set Event Status dialog box Even when you press [TAB] key, the next input control may not be focused on the Set Event Status dialog boxes opened from H/W Break, Time Measurement, and Trace Point. 2.
1.8 Real-time OS debugging functions 1. When several labels are allocated to the entry address of the tasks or handlers, the task name or the handler name displayed in the windows may be different from the actual function name. 2. When you use the feature to issue system-calls by the script command (MR SYS), the target program should be built with a specific option. For details, refer to the topic “Prepare the realtime OS debug” in the online help. 3.
1.14 The option “Always treat variables of enumerator type with unknown size as 1 byte” The “Always treat variables of enumerator type with unknown size as 1 byte” option is effective after downloading the program. When the option status is changed, target program should be downloaded again. And also, this option is effective for all variables of enumerator type in the program, even if the compiling options are different for each file. 1.
- The operand fetch results are not stored in the trace memory because of the lack of the trace memory. Address match interrupt occurred just after the opecode fetch. 1.20.5 The option “Attempt to access memory even in WAIT/STOP mode” The option “Attempt to access memory even in WAIT/STOP mode” has been added since the emulator debugger V.1.03. If the option is OFF, the debugger checks whether the status of the connected MCU is HALT. And if the MCU is in HALT status, debugger does not access memory.
2 System Requirements 2.1 M16C R8C PC7501 Emulator Debugger Target host PC PC OS Memory HDD Display Resolution IBM PC/AT compatible with Pentium III 600MHz or higher Windows XP Windows 2000 128MB or more (and in addition, ten or more times as much size as the load module file). Hard disk available capacity for installation: 100MB or more. Prepare an area at least double the memory capacity (four-times or more recommended) as the swap area.
R0E521174EPB00 (R0E521000EPB00 + R0E521174CSJ00) R0E521174EPB10 (R0E521000EPB00 + R0E521174CDB00) R0E521237EPB00 (R0E521000EPB00 + R0E521237CFK00) REJ10J1593-0100 Rev.1.00 Jul.01.07 page 7 of 11 R8C/14: R5F21142F.MCU, R5F21143F.MCU R5F21144F.MCU R8C/15: R5F21152F.MCU, R5F21153F.MCU R5F21154F.MCU R8C/16: R5F21162F.MCU, R5F21163F.MCU R5F21164F.MCU R8C/17: R5F21172F.MCU, R5F21173F.MCU R5F21174F.MCU R8C/18: R5F21181F.MCU, R5F21182F.MCU R5F21183F.MCU, R5F21184F.MCU R8C/19: R5F21191F.MCU, R5F21192F.
R0E521258EPB00 (R0E521000EPB00 + R0E521258CFJ00) R0E521276EPB00 (R0E521000EPB00 + R0E521276CFG00) R0E5212BAEPB00 (R0E521000EPB00 + R0E5212BACFG00) R0E5212BAEPB10 (R0E521000EPB00 + R0E5212BACFK00) R0E5212DAEPB00 (R0E521000EPB00 + R0E5212DACFK00) REJ10J1593-0100 Rev.1.00 Jul.01.07 page 8 of 11 R8C/24: R5F21244F.MCU, R5F21245F.MCU R5F21246F.MCU, R5F21247F.MCU R5F21248F.MCU R8C/25: R5F21254F.MCU, R5F21255F.MCU R5F21256F.MCU, R5F21257F.MCU R5F21258F.MCU R8C/26: R5F21262F.MCU, R5F21264F.MCU R5F21265F.
3 Version Report This section describes the specification of the changed software. 3.1 M16C R8C PC7501 Emulator Debugger V.1.03.00 In this version, the following specifications were changed from the previous version M16C R8C PC7501 Emulator Debugger V.1.02.00. This version supports all of the function extensions and the revisions to the restrictions in the Highperformance Embedded Workshop V.4.02.00 and V.4.03.00.
on October 16, 2005. 2. A limitation has been corrected: The structure member variables, union member variables, or class member variables whose name begins with a letter of ‘e’ or ‘E’ immediately followed by a numeral, are not referenced. For more details, refer to the RENESAS TOOL NEWS RSO-M3T-PD32RM-060116D issued on January 16, 2006. 3.
using address match interrupt that are deleted before. 3. A limitation has been corrected: When a setting of RAM monitoring area is changed with RAM Monitor Area Setting window, the setting displayed on-screen may not match with the actual ones, resulting in improper operation. For more details, refer to RENESAS TOOL NEWS RSO-M3T-PD308MF-050216D issued on February 16, 2005. 4.
