To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.
Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office.
M16C PC4701 Emulator Debugger V.1.02.00 Release Notes This document describes the notes of this debugger, and please read before you start to use this debugger. And also, please refer to the “High-performance Embedded Workshop Release Notes” about the notes of High-performance Embedded Workshop IDE. Contents 1 Notes ..................................................................................................................................................... 2 1.1 Line Assembly .......................
1 Notes 1.1 Line Assembly Regardless of the Radix setting, the default for line assembly input is decimal. Specify H as the radix for a hexadecimal input. 1.2 Event Setting 1. TAB order in Set Event Status dialog box Even when you press [TAB] key, the next input control may not be focused on the Set Event Status dialog boxes opened from H/W Break, Time Measurement, and Trace Point. 2.
1.8 Real-time OS debugging functions 1. When you use the feature to issue system-calls by the script command (MR SYS), the target program should be built with a specific option. For details, refer to the topic “Prepare the realtime OS debug” in the online help. 2. When you use the task pause function, the following code should be inserted to the configuration file of your target program. For details, refer to the user’s manual of the realtime OS.
1.14 Notes on Debugging (M16C PC4701 Emulator Debugger) 1.14.1 Variables assigned to registers When you build a target program, IAR EWM16C may generate the warning like following: Warning [w23]: Cannot represent location of Register pair variable 'R1H:R1L' In this case, you can not see the variable, which is assigned to R1 in the emulator software. IAR will fix it by upgrading XLINK in near future. Please ask IAR about it for more details. 1.14.
1.14.5 The file format selection of the object module file When the specified file format in the debug setting dialog box is different from the format of the object module file, downloading the file may cause a freeze of the debugger. Please select the correct object format. Rev.1.00 Aug.16.
2 System Requirements 2.1 M16C PC4701 Emulator Debugger Target host PC PC IBM PC/AT compatible with Pentium III 600MHz or higher Windows XP Windows 2000 Windows Me Windows 98 Second Edition 128MB (ten times the size of the target load module file recommended) Hard disk available capacity for installation: 100MB or more. Prepare an area at least double the memory capacity (four-times or more recommended) as the swap area.
Emulation Pod for M16C/20 Series M30200T-RPD-E + M30201T-PRB M30200T-RPD-E + M30218T-PRB M30200T-RPD-E + M30220T-PRB (M30220TF-PRB) M30240T-RPD-E M30245T-RPD-E M30200T-RPD-E + M302N2T-PRB M30245T3-RPD-E M30240.MCU M30245.MCU M302N2.MCU M30245T3.MCU Emulation Pod for M16C/10 Series M30100T-RPD-E + M30100T-PRB M30100T3-RPD-E + M30100T-PRB M30100T-RPD-E + M301N2T-PRB M30100T3-RPD-E + M301N2T-PRB MCU file M30100.MCU M30100T3.MCU M301N2.MCU M301N2T3.MCU Rev.1.00 Aug.16.
3 Version Report This section describes the specification of the changed software. 3.1 M16C PC4701 Emulator Debugger V.1.02.00 In this version, the following specifications were changed from the previous version M16C PC4701 Emulator Debugger V.1.01.00. This version supports all of the function extensions and the revisions to the restrictions in the High-performance Embedded Workshop V.4.01.00 and V.4.01.01.
3.3.1 Revisions to Restrictions 1. A limitation has been corrected: The automatic backup function of workspaces does not operate properly. For more details, please refer to RENESAS TOOL NEWS RSO-HEW_1-050216D issued on February 16, 2005. 2. A limitation has been corrected: When connecting with emulator PC7501 or compact emulator in a debugging session of them, High-performance Embedded Workshop might load break points using address match interrupt that are deleted before. 3.
