Technical information

( 5 / 76 )
Chapter 5. Specifications ......................................................................................................51
5.1 Specifications ......................................................................................................52
5.2 Operation Timing in Memory Expansion Mode and Microprocessor Mode .........53
(1) Separate Bus, No-wait..............................................................................53
(2) Separate Bus, With Wait, Accessing External Memory Area .................55
(3) Multiplex Bus, With Wait, Accessing External Memory Area ...............57
(4) Timing Requirements ...............................................................................59
5.3 Electrical Characteristics.....................................................................................61
5.4 Connection Diagram ...........................................................................................62
5.5 External Dimensions ...........................................................................................63
(1) External Dimensions of the Emulation Pod .............................................63
(2) External Dimensions of the Converter Board M3T-FLX-100LCC .........64
(3) Reference Dimensional Drawing for 100-pin 0.65-mm-pitch QFP Foot Pattern .... 64
Chapter 6. Troubleshooting ..................................................................................................65
6.1 Flowchart to Remedy the Troubles .....................................................................66
6.2 When the Emulator Debugger Does Not Start Up Properly ...............................67
(1) When LED Display of the PC4701 is Abnormal .....................................67
(2) Program Window Does Not Appear at Debugger Startup (target connected) ....68
(3) Program Window Does Not Appear at Debugger Startup (target not connected) . 69
(4) Errors Occur at Debugger Startup (target connected) ......................................69
6.3 Operation Differs from That of Actual MCUs....................................................70
(1) Cannot Reset from the Target System .....................................................70
(2) Data Values of ROM Area at Power-on Are Different ............................70
(3) HOLD* Control .......................................................................................70
(4) A-D Conversion Values are Different from Expected Values .................70
(5) Outputs of ALE, Address and Others are Different from Those of Actual MCUs . 70
Chapter 7. Maintenance and Guarantee................................................................................71
7.1 Maintenance ........................................................................................................72
7.2 Guarantee ............................................................................................................72
7.3 Repair Provisions ................................................................................................72
7.4 How to Request for Repair..................................................................................73