Technical information

( 66 / 76 )
Chapter 6. Troubleshooting
6.1 Flowchart to Remedy the Troubles
Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected.
FAQs visit the following URL.
http://www.renesas.com/en/tools
Figure 6.1 Flowchart to remedy the troubles
Not normal
Not normal/Error displayed
Turning on the power of PC4701
Program window of emulator debugger displayed
Front panel LEDs
of PC4701
Init dialog box of emulator
debugger displayed
1. Check the operating environment etc. of the emulator
debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.
1. Check emulator system connections.
See, "3.5 Connecting the PC4701" (page 38).
2. Redownload the firmware.
See "4.3 Downloading Firmware" (page 48).
3. Restart the PC4701 system.
Error displayed
See "6.2 (2) Program Window Does Not Appear at Debugger
Startup (target connected) (page 68).
See "6.2 (3) Program Window Does Not Appear at Debugger
Startup (target not connected) (page 69).
See "6.2 (4) Errors Occur at Debugger Startup (target connected)
(page 69).