Technical information

( 4 / 76 )
Contents
Chapter 1. Precautions for Safety ...........................................................................................7
1.1 Safety Symbols and Meanings ..............................................................................8
Chapter 2. Preparation ..........................................................................................................21
2.1 Package Components ..........................................................................................22
2.2 Other Tool Products Required for Development ................................................22
2.3 Name of Each Part ..............................................................................................23
(1) System Configuration...............................................................................23
(2) Inside of the Emulation Pod .....................................................................24
2.4 When Using the Emulator for the First Time......................................................25
Chapter 3. Setting Up ...........................................................................................................27
3.1 Removing the Upper Cover ................................................................................28
3.2 Setting Switches and Pullup Resistors ................................................................29
3.3 Selecting Clock Supply .......................................................................................33
(1) Using the Oscillator Circuit on the Target System ..................................34
(2) Changing the Internal Oscillator Circuit of the Emulation Pod ...............35
(3) Replacing the Oscillator Circuit Boards ..................................................36
3.4 A-D Conversion Bypass Capacitor .....................................................................37
3.5 Connecting the PC4701.......................................................................................38
(1) Connecting the Cable to the PC4701 .......................................................38
(2) Connecting the Cable to the Emulation Pod ............................................39
3.6 Connecting the Target System ............................................................................40
(1) Connecting to a 100-pin 0.65-mm-pitch LCC Socket .............................41
(2) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1) ................42
(3) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2) ................43
(4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3) ................44
Chapter 4. Usage ..................................................................................................................45
4.1 Making an MCU File for M3T-PD30 .................................................................46
4.2 Turning On the Power .........................................................................................46
(1) Checking the Connection of Emulator System ........................................46
(2) Turning On the Power ..............................................................................46
(3) LED Display When PC4701 Starts Up Normally ....................................47
4.3 Downloading Firmware ......................................................................................48
(1) When It is Necessary to Download Firmware .........................................48
(2) Downloading Firmware in Maintenance Mode .......................................48
4.4 Self-check............................................................................................................49
(1) Self-check Procedure ...............................................................................49
(2) If an Error is Detected in the Self-check ..................................................49