Technical information

( 52 / 76 )
Chapter 5. Specifications
5.1 Specifications
Table 5.1 lists the specifications of the M306NAT2-RPD-E.
Table 5.1 Specifications of the M306NAT2-RPD-E
Emulator
Applicable MCU
Evaluation MCU
Usable mode
Emulation memory
Maximum operating frequency
Clock supply
Operating voltage
Operating temperature
Storage temperature
Power supply to emulation pod
Connection to target system
See "3.6 Connecting the Target
System" (page 40).
Overseas standards
PC4701
M16C/6N Group M306NA and M306NB
M30622SAFP x1, M306NAMCT-TOOL x1
Single-chip mode
Memory expansion mode
Microprocessor mode
1 MB
16 MHz (no-dividing)
X
IN
-X
OUT
Internal oscillator circuit board (OSC-3)
Switchable to external oscillator input
X
CIN
-X
COUT
Internal oscillator circuit board
Switchable to external oscillator input
4.2 to 5.5 V
5 to 35°C (no dew)
-10 to 60°C (no dew)
Supplied from PC4701
• 100-pin 0.65-mm-pitch QFP (100P6S-A):
(1) M3T-FLX-100LCC (included)
+ M3T-DUMMY100S (separately available)
(2) M3T-FLX-100LCC (included)
+ M3T-DIRECT100S (separately available)
(3) M3T-FLX-100NRB (separately available)
• 100-pin LCC socket:
M3T-FLX-100LCC (included)
• U.S. EMI standards (FCC part 15 Class A)
• CE marking (EN55022, EN55024)