Technical information

( 38 / 76 )

3.5 Connecting the PC4701

To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included

in this product package. Connect the PC4701 side connector of the FLX120-RPD to the cable

connector of the PC4701, then secure with screws the FLX120-RPD.

(1) Connecting the Cable to the PC4701

Figure 3.11 shows how to connect the PC4701 and FLX120-RPD.

Figure 3.11 Connecting the PC4701 and FLX120-RPD

CAUTION

Notes on Connecting the Cable:

• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side

connector horizontally with the "UPSIDE" facing up.

• Always shut OFF power before connecting the cable. The power ON state could

destroy internal circuits.

Note on Securing the Screws:

• After connecting the cable to the emulator main unit PC4701, be sure to secure the

screws mounted in both sides of the connector.

Emulator main unit PC4701

PC4701 side connector of FLX120-RPD

"UPSIDE" should face up.

Secure this screw.