Technical information

( 24 / 76 )
(2) Inside of the Emulation Pod
Figure 2.2 Internal view of the emulation pod
(1) MCU-dependent board
Board grouping parts (pins and added functions) which vary according to MCU model.
(2) Base board
Board for the M16C Series MCUs which controls the interface with the PC4701 and the
evaluation MCU.
(3) Memory board
Board for the M16C Series MCUs on which the emulation memory (1 MB) and the map memory
(4 bit × 1 M) are mounted.
(4) Oscillator circuit board
Oscillator circuit board on which the oscillation module device (16 MHz) is mounted. It is
possible to change the operating frequency by replacing it with a separately prepared oscillator
circuit board.