Technical information

7.1.5. BAUD RATE SETTING

HMON has initially set to connect at 115200Baud. Should the user wish to change this, the value for the BRR in

HMONserialconfiguser.c will need to be changed and the project re-built. Please refer to the HMON User Manual for further

information.

7.1.6. INTERRUPT MASK SECTIONS

The EDK3687 has fixed interrupt priorities. The serial (SCI3 )port interrupt is used by HMON. The Real Time clock, external

interrupt and Timer V interrupts have a higher priority than the serial port. If these interrupts are used HMON may not

function correctly.

7.2. ADDITIONAL INFORMATION

For details on how to use HEW, with HMON, `refer to the HEW manual available on the CD or from the web site.

For information about the H8/3687 series microcontrollers refer to the H8/3687 Series Hardware Manual

For information about the H8/300 assembly language, refer to the H8300 Series Programming Manual

Further information available for this product can be found on the Renesas web site at:

http://www.eu.renesas.com/tools

General information on Renesas microcontrollers can be found at the following URLs.

Global: http://www.renesas.com/