Datasheet

Section 4 Address Break
Rev. 3.00 Mar. 15, 2006 Page 63 of 526
REJ09B0060-0300
Section 4 Address Break
The address break simplifies on-board program debugging. It requests an address break interrupt
when the set break condition is satisfied. The interrupt request is not affected by the I bit of CCR.
Break conditions that can be set include instruction execution at a specific address and a
combination of access and data at a specific address. With the address break function, the
execution start point of a program containing a bug is detected and execution is branched to the
correcting program. Figure 4.1 shows a block diagram of the address break.
BARHBARE BARL
BDRH BDRL
ABRKCR
ABRKSR
Internal address bus
Comparator
Interrupt
generation
control circuit
Internal data bus
Comparator
Interrupt
[Legend]
BARE, BARH, BARL:
BDRH, BDRL:
ABRKCR:
ABRKSR:
Break address register
Break data register
Address break control register
Address break status register
Figure 4.1 Block Diagram of Address Break