Datasheet

Section 13 Timer W
Rev. 3.00 Mar. 15, 2006 Page 181 of 526
REJ09B0060-0300
Section 13 Timer W
The timer W is a 16-bit timer having output compare and input capture functions. Timer W can
count external events and output pulses with an arbitrary duty cycle by compare match between
the timer counter and four general registers. Thus, it can be applied to various systems.
13.1 Features
• Selection of five counter clock sources: four internal clocks (φ, φ/2, φ/4, φ/8) and an external
clock (external events can be counted)
• Capability to process up to four pulse outputs or four pulse inputs
• Four general registers:
Independently assignable output compare or input capture functions
Usable as two pairs of registers; one register of each pair operates as a buffer for the output
compare or input capture register
• Timer input/output functions
Waveform output by compare match:
Selection of 0 output, 1 output, or toggle output
Input capture function:
Rising edge, falling edge, or both edges
Counter clearing function:
Counters can be cleared by compare match
PWM mode:
Up to three-phase PWM output can be provided with desired duty ratio.
• Any initial timer output value can be set
• Five interrupt sources
Four compare match/input capture interrupts and an overflow interrupt.