Datasheet

Rev.6.00 Oct.28.2004 page 368 of 1016
REJ09B0138-0600H
10.2.10 Module Stop Control Register (MSTPCR)
MSTPCRH MSTPCRL
Bit :1514131211109876543210
Initial value : 0 0 1 1111111111111
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
When the MSTP13 bit in MSTPCR is set to 1, TPU operation stops at the end of the bus cycle and a transition is made to
module stop mode. Registers cannot be read or written to in module stop mode. For details, see section 21.5, Module Stop
Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in software standby mode.
Bit 13—Module Stop (MSTP13): Specifies the TPU module stop mode.
Bit 13
MSTP13 Description
0 TPU module stop mode cleared
1 TPU module stop mode set (Initial value)