Datasheet

Rev.6.00 Oct.28.2004 page 361 of 1016
REJ09B0138-0600H
10.2.4 Timer Interrupt Enable Register (TIER)
Channel 0: TIER0
Channel 3: TIER3
Bit:76543210
TTGE — — TCIEV TGIED TGIEC TGIEB TGIEA
Initial value : 0 1 0 0 0 0 0 0
R/W : R/W — — R/W R/W R/W R/W R/W
Channel 1: TIER1
Channel 2: TIER2
Channel 4: TIER4
Channel 5: TIER5
Bit:76543210
TTGE — TCIEU TCIEV — — TGIEB TGIEA
Initial value : 0 1 0 0 0 0 0 0
R/W : R/W — R/W R/W — — R/W R/W
The TIER registers are 8-bit registers that control enabling or disabling of interrupt requests for each channel. The TPU
has six TIER registers, one for each channel. The TIER registers are initialized to H'40 by a reset, and in hardware standby
mode.
Bit 7—A/D Conversion Start Request Enable (TTGE): Enables or disables generation of A/D conversion start requests
by TGRA input capture/compare match.
Bit 7
TTGE Description
0 A/D conversion start request generation disabled (Initial value)
1 A/D conversion start request generation enabled
Bit 6—Reserved: This bit cannot be modified and is always read as 1.
Bit 5—Underflow Interrupt Enable (TCIEU): Enables or disables interrupt requests (TCIU) by the TCFU flag when
the TCFU flag in TSR is set to 1 in channels 1 and 2.
In channels 0 and 3, bit 5 is reserved. It is always read as 0 and cannot be modified.
Bit 5
TCIEU Description
0 Interrupt requests (TCIU) by TCFU disabled (Initial value)
1 Interrupt requests (TCIU) by TCFU enabled