Datasheet

Section 23 Power-Down Modes
Rev.6.00 Mar. 18, 2009 Page 829 of 980
REJ09B0050-0600
23.1.3 Extension Module Stop Control Registers H and L (EXMSTPCRH,
EXMSTPCRL)
EXMSTPCR performs all-module-clocks-stop mode control with MSTPCR.
When entering all-module-clocks-stop mode, set EXMSTPCR to H’FFFF. Otherwise, set
EXMSTPCR to H’FFFD.
• EXMSTPCRH
Bit Bit Name Initial Value R/W Module
15
to
12
— All 1 R/W Reserved
Read/write is enabled. 1 should be written in
writing.
11 MSTP27 1 R/W —
10 MSTP26 1 R/W —
9 MSTP25 1 R/W —
8 MSTP24 1 R/W —
• EXMSTPCRL
Bit Bit Name Initial Value R/W Module
7 MSTP23 1 R/W —
6 MSTP22 1 R/W —
5 MSTP21 1 R/W —
4 MSTP20 1 R/W I
2
C bus interface 2_1 (IIC2_1)
3 MSTP19 1 R/W I
2
C bus interface 2_0 (IIC2_0)
2 MSTP18 1 R/W —
1 MSTP17 0 R/W —
0 MSTP16 1 R/W —