Datasheet

Section 19 Flash Memory (0.35-μm F-ZTAT Version)
Rev.6.00 Mar. 18, 2009 Page 699 of 980
REJ09B0050-0600
19.5.2 Flash Memory Control Register 2 (FLMCR2)
FLMCR2 is a register that displays the state of flash memory programming/erasing. When the
SWE bit in FLMCR1 is cleared to 0, FLMCR2 is initialized to H'00. FLMCR2 is a read-only
register, and should not be written to.
Bit Bit Name Initial Value R/W Description
7 FLER 0 R Indicates that an error has occurred during an
operation on flash memory (programming or
erasing). When FLER is set to 1, flash memory
goes to the error-protection state.
See section 19.8.3, Error Protection, for details.
6
to
0
— All 0 R Reserved
These bits always read 0.