Datasheet

Section 10 16-Bit Timer Pulse Unit (TPU)
Rev.6.00 Mar. 18, 2009 Page 413 of 980
REJ09B0050-0600
10.3.2 Timer Mode Register (TMDR)
TMDR registers are used to set the operating mode for each channel. The TPU has six TMDR
registers, one for each channel. TMDR register settings should be made only when TCNT
operation is stopped.
Bit Bit Name Initial Value R/W Description
7, 6 – All 1 – Reserved
These bits are always read as 1 and cannot be
modified.
5 BFB 0 R/W Buffer Operation B
Specifies whether TGRB is to operate in the normal
way, or TGRB and TGRD are to be used together
for buffer operation. When TGRD is used as a buffer
register, TGRD input capture/output compare is not
generated.
In channels 1, 2, 4, and 5, which have no TGRD, bit
5 is reserved. It is always read as 0 and cannot be
modified.
0: TGRB operates normally
1: TGRB and TGRD used together for buffer
operation
4 BFA 0 R/W Buffer Operation A
Specifies whether TGRA is to operate in the normal
way, or TGRA and TGRC are to be used together
for buffer operation. When TGRC is used as a buffer
register, TGRC input capture/output compare is not
generated.
In channels 1, 2, 4, and 5, which have no TGRC, bit
4 is reserved. It is always read as 0 and cannot be
modified.
0: TGRA operates normally
1: TGRA and TGRC used together for buffer
operation
3
2
1
0
MD3
MD2
MD1
MD0
0
0
0
0
R/W
R/W
R/W
R/W
Modes 3 to 0
These bits are used to set the timer operating mode.
MD3 is a reserved bit. The write value should
always be 0. See table 10.11 for details.