Datasheet

Section 7 DMA Controller (DMAC)
Rev.6.00 Mar. 18, 2009 Page 282 of 980
REJ09B0050-0600
Figure 7.33 shows an example of single address transfer using the write data buffer function. In
this example, the CPU program area is in on-chip memory.
φ
Internal address
Internal read signal
RD
DACK
External address
DMA
read
DMA
single
CPU
read
DMA
single
CPU
read
Figure 7.33 Example of Single Address Transfer Using Write Data Buffer Function
When the write data buffer function is activated, the DMAC recognizes that the bus cycle
concerned has ended, and starts the next operation. Therefore, DREQ pin sampling is started one
state after the start of the DMA write cycle or single address transfer.
7.5.12 Multi-Channel Operation
The DMAC channel priority order is: channel 0 > channel 1, and channel A > channel B. Table
7.11 summarizes the priority order for DMAC channels.
Table 7.11 DMAC Channel Priority Order
Short Address Mode Full Address Mode Priority
Channel 0A Channel 0 High
Channel 0B
Channel 1A Channel 1
Channel 1B Low