Datasheet

Section 6 Bus Controller (BSC)
Rev.6.00 Mar. 18, 2009 Page 162 of 980
REJ09B0050-0600
By program wait
T
1
Address bus
φ
AS
RD
Data bus
Read data
Read
HWR, LWR
Write data
Write
WAIT
Data bus
T
2
T
w
T
w
T
w
T
3
By WAIT pin
Notes: 1. Downward arrows indicate the timing of WAIT pin sampling.
2. When RDN = 0
Figure 6.17 Example of Wait State Insertion Timing
6.5.5 Read Strobe (RD) Timing
The read strobe (RD) timing can be changed for individual areas by setting bits RDN7 to RDN0 to
1 in RDNCR. Figure 6.18 shows an example of the timing when the read strobe timing is changed
in basic bus 3-state access space.
When the DMAC is used in single address mode, note that if the RD timing is changed by setting
RDNn to 1, the RD timing will change relative to the rise of DACK.