Datasheet

Section 6 Bus Controller (BSC)
Rev.6.00 Mar. 18, 2009 Page 129 of 980
REJ09B0050-0600
6.3.4 Read Strobe Timing Control Register (RDNCR)
RDNCR selects the read strobe signal (RD) negation timing in a basic bus interface read access.
Bit Bit Name Initial Value R/W Description
7
6
5
4
3
2
1
0
RDN7
RDN6
RDN5
RDN4
RDN3
RDN2
RDN1
RDN0
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Read Strobe Timing Control 7 to 0
These bits set the negation timing of the read
strobe in a corresponding area read access.
As shown in figure 6.2, the read strobe for an
area for which the RDNn bit is set to 1 is
negated one half-state earlier than that for an
area for which the RDNn bit is cleared to 0. The
read data setup and hold time specifications are
also one half-state earlier.
0: In an area n read access, the RD is negated
at the end of the read cycle
1: In an area n read access, the RD is negated
one half-state before the end of the read cycle
(n = 7 to 0)
Bus cycle
T
1
T
2
RD
Data
φ
RD
Data
RDNn = 0
RDNn = 1
T
3
Figure 6.2 Read Strobe Negation Timing (Example of 3-State Access Space)